Magitec

Magnetic Drag Pump: - Flow: up to 6 m3/h - Body and impeller: PP or PVDF - Ceramic shaft - Suction-drive connection: 1"-3/4" - Motor: 0.25 Kw single-phase or three-phase

Valco Melton’s DD-1 Diaphragm Pump represents an innovative breakthrough in pump design. The electronic reversing control is extremely reliable and is not affected by normal wear characteristics of mechanical devices. The DD-1 Diaphragm Pump is automatically reversed by low-voltage, solid-state electronics. Many diaphragm pumps use air-powered mechanical devices, which reserve the pump stroke. These reversing mechanisms can “hang-up” and stall the pump when operated at low air pressure or when cycling at slow speeds. To overcome these limitations, common diaphragm pumps must be operated at air pressures high enough to ensure stroke reversal. For most applications, this results in an expensive waste of compressed air. • Trusted reliability of a 1:1 diaphragm pump • Electronic shifting • High flow rate • Suction from totes, drums, and pails• 24VAC source from Valco Melton controls or optional transformer • Wall mount, pail mount, or drum mount

Valco Melton’s pumps along with cost-effective glue system regulators offer uniform and consistent adhesive delivery to match your specific production needs.