Module linéaire AGORA Technique

Material: Body carbon steel. Balls roller bearing steel. Diverters plastic. Version: Bright. Note: Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With double-sided end seal. 4-row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values: v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request: Various precision and preload classes.

Material: Balls, rails and slides roller bearing steel. Version: Rail and slide galvanized. Tracks inductively hardened. Balls hardened. Note: Partial extension consisting of a fixed guide rail and a movable slider. The slide can move somewhat more than half the length of the rail (C travel). By removing the locking screw, a partial extension with the travel length C is possible to both sides. The total travel is thus 2C. This compact and simple construction allows very high load ratings. The maximum traversing speed is 0.8 m/s. Application temperature -30 °C to +170 °C. On request: Other lengths (pitch 80 mm). Size 28 up to max. 1170 mm. Size 35 up to max. 1490 mm. Size 43 up to max. 1970 mm.

Material: Spindle steel 1.1213. Nut steel 1.3505. Version: Spindle and nut ground, induction hardened to 62 ± 2 HRC and polished. Note: Miniature ball screw linear actuators with machined shaft ends and screw-on barrel nut. Supplier with oil coating. Re-lubrication is recommended. Produced acc. to precision class C5. Without preloading with backlash (max. 0.008 mm). Precision spindles for use in optics, the food industry, automation, medical technology, the defence industry, aeronautics and precision tool technology. Attention: The screw-in cylinder nut must not be removed from the spindle, otherwise the balls fall out.