REACTORS of NVO HIMMASHNAFTOGAZ Ltd

Product

REACTORS
  • REACTORS
  • REACTORS
  • REACTORS
Devices with mechanical agitators

Devices with mixing devices are designed for storage, mixing, heat and mass exchange and chemical reactions in working media, the main component of which is liquid.

WORKING MEDIA: neutral, aggressive, fire hazardous, explosive, toxic liquids, emulsions, gas

Product Description

Devices with mechanical agitators

Devices with mixing devices are designed for storage, mixing, heat and mass exchange and chemical reactions in working media, the main component of which is liquid.

WORKING MEDIA: neutral, aggressive, fire hazardous, explosive, toxic liquids, emulsions, gas-liquid mixtures or suspensions with volume concentration of solid phase not more than 30%;
dynamic viscosity not more than 5 Pa.s;
density not more than 2000 kg/m ³;
temperature from minus 30 to plus 250 ° С.

HEAT CARRIERS - tap or cooling water, condensate, brine, steam, organic heat carriers with temperature from minus 30 to plus 250 ° С.

VESSEL HOUSING CAPACITY - 0.01; 0,025; 0,04; 0,063; 0,1; 0,16; 0,25; 0,4; 0.63 m³

ALLOWABLE PRESSURE (conditional, at wall temperature 20 ° С):
in the body of the apparatus with an elliptical bottom and an elliptical or flat removable cover: excess - no more than 0.6 MPa (6 kgf/cm²), residual (vacuum) - not less than 0.67 kPa (5 mm Hg) depending on the type of compaction of the shaft of the stirring device;
in the body of the apparatus with a flat bottom and a flat removable cover - atmospheric (filling);
in the heat exchange device: in a smooth welded jacket excess - no more than 0.4 MPa (4 kgf/cm ²), in the coil excess - no more than 1.6 MPa (16 kgf/cm ²).

Allowable overpressure in the housing and heat exchange device at maximum values of wall temperature is set on the basis of strength calculation.

TEMPERATURE - range of limit values of casing wall temperature and heat exchanger from minus 30 to plus 250 ° С. The allowable wall temperature depends on the material grade of the housing and heat exchanger and the type of shaft seal of the agitator.

MATERIAL DESIGN - steel grades St3sp or 12Kh18N10T depending on the composition of the working medium and the mode of operation of the apparatus.

They are available into the following types:
 
  • devices with elliptical bottom and removable elliptical cover;
  • devices with elliptical bottom and removable elliptical cover, with smooth welded jacket;
  • devices with flat bottom and removable flat cover;
  • all-welded devices with elliptical bottom and cover;
  • all-welded devices with elliptical bottom and cover, with smooth welded jacket;
  • devices with flat bottom and cover;
  • all-welded devices with elliptical bottom and cover with half-tube jacket.



 

Product Price

Price not indicated

Ask for a quote

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
*Mandatory fields

10   products -