Product
Grilles de sécurité PS-OFF
À usage fonctionnel ou décoratif, les grilles de sécurité s’adaptent à tous les milieux. Grâce à leurs différents types de surface, elles garantissent une solution en termes de stabilité, d’adhérence, d’écoulement, de drainage et de passage piéton
Fabriquées selon des techniques permettant une production de qualité constante, les grilles de sécurité JK Technic sont conformes aux normes de sécurité actuelles et sont fabriquées avec des tolérances suivant la norme RAL-GZ 639.
Product Price
Product Category
Company website
Our recommended products and services
-
-
JUMBO is selected international distributor of fences from HERAS Mobile Fencing of The Netherlands. Today JUMBO primarily distributes the HERAS fences in Scandinavia and Finland Products as props, chimney scaffolds, roof railings, couplers, eye screws and scaffold clamps, are produced at the JUMBO factory in Kolding, Denmark or at the JUMBO factory in Qingdao, China Products as hand trucks, net & sheeting, tents, temporary roof, rubble chutes and cargo straps, are produced at various partners in Jumbo private label
-
SATECH pre-assembled swing doors are now equipped with a new crossbar, which improves the rigidity of the structure and makes access even more secure. As in the previous models, the new pre-assembled swing doors are easy and quick to assemble, allowing a significant reduction in assembly time. Available with 40×40 and 60×60 section posts, the new swing doors are compatible with all Satech systems and most locks. The height of 2100 mm under the crossbar meets the requirements of the new standard 14120.
-
SATECH, the specialist in machine guarding, presents the AdaptaGuard Series industrial machine guarding systems. The modular AdaptaGuard Series is a system that combines convenience and strength. It is ideal for any situation where there is a high risk of impact from mechanical tools. The frameless panel, reinforced with transverse ribs, is made of 4 mm steel wire and mounted on the 50 x 50 mm posts with heavy-duty captive fasteners. The square foot and thick base stabilise the post during installation. The AdaptaGuard range is quick to assemble: a single type of post for linear, angular or door mounting reduces preparation time, the wide ribs facilitate the use of the electric screwdriver, and finally the absence of a frame allows the dimensions of the panels to be changed quickly on site, in case of unforeseen circumstances. AdaptaGuard Series Panels: Features: - Panels: shaped mesh - Mesh size: 32 x 68 x 4 mm - Paint: epoxy-polyester powder (for interior use only). Dimensions : - Bases: 196, 292, 676, 772, 996, 1188, 1476, 1988 mm - Heights: 1500, 2080, 2490 mm. AdaptaGuard Series Posts: Features: - Section: 50 x 50 x 1.5 mm - Base: welded with 4 anchor points 120 x 120 x 8 mm - Paint: epoxy-polyester powder (for indoor use only). Dimensions : - Heights: 1660, 2240, 2650 mm. Colours: Panels and posts are painted with epoxy-polyester powder (for indoor use only) in the "standard" colours RAL 9005 and 1021 or 7035. Non-standard colours can be produced on request to meet any special requirements. All our products comply with European standards (International Standard EN ISO 14120 "General requirements for the design and construction of fixed and movable guards", International Standard EN ISO 13857).
-
