Tipped as one of the superfood trends of 2016, seaweed is packed with minerals, vitamins, fibre, omega 3 and protein, often being added
to food as a nutrient boost. Claims that it can prevent colon cancer, control blood glucose level and aid digestion make it of significant dietary and health interest whilst sustainable farming and harvesting methods have led to seaweed’s recognition as a ‘futurefood’ as well as a superfood.
The fibrous, wet and often sandy or gritty, seaweed is however difficult to process with costly and time consuming drying times. To
reduce the drying process seaweed is often chopped to facilitate more rapid, less nutrient destructive drying processes.
For many years processing experts Hosokawa Micron Ltd have offered processing solutions to alginate producers across the world. To meet
the demands for milled, freshly harvested seaweed Hosokawa Micron Ltd has developed a two stage system comprising of a Prebreaker and Vertical Disintegrator. This low energy system offers uniform particle size reduction of wet or moist seaweeds for further processing, which offers higher levels of availability compared to conventional hammer mills.
Once the friable materials have passed through the initial size reduction (Prebreaker) stage, they are transferred directly to the Hosokawa
Micron Vertical Disintegrator to be further reduced to a uniform particle size.
Designed for the reduction of fine to coarse, wet, moist or dry materials, the Hosokawa Micron Vertical Disintegrator provides automatic and
continuous separation of disintegration resistant materials with redirection through the system from the exclusive secondary discharge.
Uniform particle size is achieved as materials are subjected to repeated impact and attritional force from the high speed rotating hammers, and
carried by centrifugal force through a perforated sizing screen. The vertical screen frees itself of product instantaneously during processing, which is ideal for products with a high moisture content.
Barry Walmsley, Product Manager, Hosokawa Micron Ltd says, ‘The sturdy system, can operate at 12- 20 t/h.
It is low noise and delivers product in a narrow particle size distribution, resulting in higher yields and less effluent. The Disintegrator
is designed to withstand corrosion caused by the low pH often involved in the process and erosion caused by the natural inclusions which determines a predominant use of higher abrasion resistant materials of manufacture.’
Find out more about Hosokawa Micron here