- Company Summary
The complete product range of balancing and diagnosis technology from Schenck. The range extends from manual applications in the workshop area to fully-automatic systems for mass production . naturally all with the proven Schenck standard of quality.
Dynamic Balancing and Diagnostic Systems
Every rotating component, be it a dental drill, a crankshaft or a turbine in a power station, needs to be balanced. Schenck offers a comprehensive range of products for dynamic balancing, rotating and reciprocating components and sub-assemblies - ranging from light weight miniature rotors weighing only a few grams to heavy weight rotors such as a steam turbine rotor weighing 400 t . Schenck RoTec GmbH is a subsidiary of DÜRR AG, a globally operating, top ranking supplier based in Stuttgart, Germany and leading manufacturer of balancing machines and diagnostic systems.
Products & Services
Manual balancing machines
Semi-automatic balancing machines
Automatic balancing machines
Dynamic Balancing service
Automobile and first tier supplier industry
Aviation and space industry
Dynamic Balancing Machines for Turbocharger Core Assemblies (110 MBRS)
In this single unit balancing machine design, all components are combined in one rugged housing. Therefore the machine requires very little floor space for installation. The middle part of the machine accommodates the balancing unit with assembly adapter, surrounded by an enclosure to protect the operator in the even of the bursting of the rotor.
Pasio series - Horizontal balancing machines for rotors between 5 and 50 kg
The PASIO series from Schenck heralds a new generation of compact balancing machines, in which many of our visions have been realised. The Pasio series enables accurate balancing of a wide range of rotors. Cylindrical rotors with their own shaft journals as well as disc type rotors with intermediate shafts can be balanced simply and accurately. The rotor can weigh up to 50 kg, with a diameter up to 600 mm and a length up to 1100 mm.
Virio series - Vertical balancing machines for rotors up to 300 kg
The VIRIO enables the balancing of a wide range of disc shaped rotors, such as brake discs, torsional vibration dampers, flanges, compressors, fans, segmented grinders, pumps, wheel hubs, lawn mower blades, pulleys, grinding wheels, flywheels, clutch components, gear wheels, chaff rotors, railroad wheels, aircraft tyres and propellers.
Dynamic Balancing Machines for Drive Shafts (HGW)
Horizontal, hard bearing balancing machines series HGW are designed especially for low and high speed balancing of drive shafts. A modular design provides flexibility to change or add components for other balancing tasks such as balancing electric armatures, drums, etc.
Ceno - Crankshaft balancing machine
The CENO is a compact automatic balancing machine for small and medium-sized crankshafts up to a maximum weight of 20 Kg. By means of standardised interfaces, it can easily be integrated into customers. loading and unloading devices . even as a retrofit. For smaller numbers of parts, the overall concept allows the CENO to be loaded manually without any restrictions.
Wheel assembly lines (130 TBUR)
Automatic assembly and inflation of tubeless tyres in normal, low profile or super low profile type with steel or aluminum rims of various dimensions in batches or in mixed sequence.
Linking of the line, for example, with a preceding valve insertion station and a following wheel balancing machine. Alternatively other assembly and inflation lines for tubed tyres or a mixed operation of tubeless/tubed tyres are also available.
Dynamic Balancing machines for drive shafts (RBRQ200x)
Machine design is ideally suited for balancing vehicle drive shafts. Measurement and correction of unbalance in single and multi-piece drive shafts of passenger vehicles, light and heavy duty commercial vehicles. Balancing and correction capacity for manufacturing, testing and inspection at vehicle manufacturers and component suppliers plants.
Transfer balancing machines for wound armatures (460 KBTU)
Six station machine with fully automatic sequence of operations. Station to station transfer and integration with peripheral equipment through integrated rotary transport. Work pieces can be delivered to the machine by conveyor or pallet.
Measurement and correction of unbalance of armatures of various sizes. Use of the machine in production lines for very high production volumes. Unbalance correction by milling into the stack (profile/slot milling) in one or two planes.
HL series - Horizontal balancing machines for the aircraft industry
Force-measuring, horizontal dynamic balancing machine with permanent calibration and manual operation.
The machine corresponds to SAE machine classification according to SAE ARP 4048: Rotor support in saddle bearings, microprocessorcontrolled measuring unit and optional protective enclosure (protection class B or C) are specifically designed for the balancing tasks of the aircraft industry. They are equipped with end and/or belt drive systems. A large range of accessories is available for expanded range of tasks.
DH series - High speed dynamic balancing and ovespeed test facility
For more than 40 years Schenck RoTec has been engaged in the development and design of special high-speed dynamic balancing machines for heavy turbine and generator rotors as well as for high-speed compressors of steam and gas turbines.
DH bearing pedestals are designed for the following applications:
Low Speed dynamics balancing
Checking of rotor balance at high speeds (operational speed)
Dynamic straightening of flexible rotors
Testing of material strength by operating rotors at overspeed
Rotor investigation in operational bearings
Consulting - Putting theory into practice: Prototypes on the test rig
The moment of truth comes, when the first physical example of your design work is finally complete. Will your assumptions, ideas and calculations turn out to be correct? Will your prototype behave as expected, or will you have to improve certain details?
In our test shop, we can analyse how your rotor or assembly will behave in actual operation. We will provide all the data you need for a comprehensive assessment of your protoype. We will measure and analyse unbalance, eliminate it and conduct a detailed analysis of vibrations, if so desired. These tests will provide valuable information for design and production.
Dynamic Balancing service
This service is ideal if the right balancing machine for a specific job is not available in your company, or if the low quantities involved render the purchase of a balancing machine economically inefficient.
Our dynamic balancing service can also help in research and development when it comes to balancing new rotors or assemblies. Benefit from our vast experience and extensive resources. We will help you to save cost and valuable time.
Field balancing and vibration analysis
The SmartBalancer is a handy instrument for balancing installed rotors fast, accurately and inexpensively without disassembling machines. You can correct rotors of practically any size or weight on one and two levels (i.e., statically and dynamically).
Key phrases: Turbocharger core balancing machines
Key phrases: Dynamic balancing machines
Key phrases: Portable balancing machines
Key phrases: Horizontal balancing machines
Key phrases: Vertical balancing machines
Type of company
+44 1926 474034
semi and fully automatic vertical balancing machine for disc shaped rotors
machine tool balancing machine
turbocharger core balancing machine for aftermarket
horizontal balancing machine
range of vertical balancing machines for disc shaped rotors ranging in weight from a few grams to 300kgs, diameters up to 990mm with optional correction facilities
crankshaft balancing machine
vehicle fluid dosing machine
propeller shaft balancing machines
portable field balancing unit
- Operating income
- Service provider
Other classifications (for some countries)
SIC (GB 2007) :
Manufacture of equipment for concrete crushing and screening roadworks (28923)
NACE Rev.2 (EU 2008) :
Manufacture of machinery for mining, quarrying and construction (2892)
ISIC 4 (WORLD) :
Manufacture of machinery for mining, quarrying and construction (2824)
You might also like:
You might also like:
Do you manage a company?
Register your company on Kompass for free to enhance your online presence. Contact potential prospects to help develop and build your business.Register your company for free
Purchase detailed company information
EXPORT THE COMPANY PROFILE : Schenck LtdPurchase detailed company information in PDF format